Commission Implementing Regulation (EU) 2024/2494 of 24 September 2024 laying down implementing technical standards for the application of Regulation (EU) 2023/1114
as it stood on 2024-09-24, permalink: /eu-eurlex/32024r2494/2024-09-24--aa656fb2437040f1668acd3c56c738b3caa6e34328514d8cc843b7b69d5828fd
Article 1
For the purposes of this Regulation, the following definitions apply:
| (1) | ‘electronic means’ are means of electronic equipment for the processing (including digital compression), storage and transmission of data, employing wires, radio, optical technologies, or any other electromagnetic means that ensure that the completeness, integrity and confidentiality of the information are maintained during the transmission; |
|---|
| (2) | ‘submitting body’ means the body submitting a notification, a request for information or cooperation, or providing unsolicited information; |
|---|
| (3) | ‘receiving body’ means the body receiving a notification, a request for information or cooperation, or unsolicited information. |
|---|
Article 2
Each competent authority shall designate a contact point for the purposes of cooperating and exchanging information pursuant to Article 96 of Regulation (EU) 2023/1114.
Competent authorities shall communicate the details of their contact points to ESMA and EBA by 27 November 2024 and keep EBA and ESMA informed of any changes to those details.
ESMA and EBA shall maintain and keep up-to-date a list of the contact points designated in accordance with paragraph 1.
Article 3
For the purposes of cooperation and exchange of information in accordance with Article 96(1) of Regulation (EU) 2023/1114, competent authorities and ESMA and EBA shall communicate in writing either by post or by electronic means, unless otherwise provided for in this Regulation.
When determining the most appropriate means of communication in any particular case, competent authorities, ESMA and EBA shall take due account of the following:
| (a) | confidentiality considerations; |
|---|
| (b) | the time necessary for correspondence; |
|---|
| (c) | the volume of material to be communicated; |
|---|
| (d) | the ease of access to the information that is being exchanged. |
|---|
- The means of communication referred to in paragraph 1 shall ensure the completeness, integrity and confidentiality of the information during the transmission thereof.
Article 4
Notifications and requests for information or cooperation shall be submitted in writing by post or by electronic means, using the form set out in Annex I. When a competent authority, ESMA or EBA makes a request for information or cooperation pursuant to Article 96 of Regulation (EU) 2023/1114, they shall use the standard form set out in Annex I to this Regulation. The submitting body shall send the notification or request to the contact point designated pursuant to Article 2.
When making a request for information or cooperation, the submitting body:
| (a) | may attach to the request any document or supporting material deemed necessary to support that request; |
|---|
| (b) | may, in urgent cases, make the request orally, but that oral request shall subsequently be confirmed in writing without undue delay. |
|---|
Article 5
The receiving body shall send an acknowledgement of receipt to the submitting body as soon as possible and in any case within 5 working days of receipt of a notification or request made pursuant to Article 4, using the form set out in Annex II, and, where possible, indicate an estimated date of response.
Whenever it is not possible to indicate an estimated date of response, the receiving body shall indicate the frequency with which it will update the submitting body.
Article 6
The submitting body and the receiving body shall ensure that a request for cooperation or exchange of information is dealt with as soon as possible. They shall cooperate to resolve any difficulties that may arise in executing a request.
Where the submitting body attaches to the request for cooperation and exchange of information any document or supporting material in accordance with Article 4(2), point (a), and where such document or supporting material is not in an official language of the Member State of the receiving body, the submitting body shall also provide a translation of such document or supporting material, or a summary of such document or supporting material in a language customary in the sphere of international finance.
If the receiving body requests any clarification about a notification or request submitted in accordance with Article 4, it shall request further clarification promptly by any means.
The submitting body shall respond promptly to any request for clarification from the receiving body.
When replying to a request made in accordance with Article 4, the receiving body shall:
| (a) | use the form set out in Annex III; |
|---|
| (b) | take all reasonable steps to provide the requested cooperation or information |
|---|
| (c) | act without delay and in a manner which ensures that any necessary regulatory action can proceed expediently taking into account the complexity of the request concerned and whether it is necessary to involve third parties. |
|---|
Where appropriate, the receiving body shall provide the submitting body with regular updates on the progress of a pending request, including updates on the revised estimated date of reply.
Where the receiving body becomes aware of circumstances that may lead to a delay in meeting the estimated date or a timeframe of reply, referred to in Article 5(1), by more than 10 working days, it shall inform the submitting body without undue delay.
Where the request justifies closer cooperation between the submitting and the receiving body or where the request has been marked as urgent, the bodies shall agree on the frequency and means of the closer cooperation.
Article 7
For the purposes of any cooperation and exchange of information that is not the subject of a specific request, including any subsequent communications relating to it, the submitting body shall use the form set out in Annex IV.
Article 8
Where ESMA or EBA are requested under Article 95(5) of Regulation (EU) 2023/1114 to coordinate an investigation or inspection with cross-border effect, ESMA or EBA may establish a temporary group on an ad hoc basis to include the competent authorities of the Member States affected by that investigation or inspection.
When participating in temporary groups referred to in paragraph 1, ESMA and EBA shall consult each other regularly.
Article 9
Referral to ESMA pursuant to Article 95(6) of Regulation (EU) 2023/1114 or to EBA pursuant to Article 95(7) of that Regulation of a rejection or absence of action within a reasonable timeframe shall be made in writing using the form set out in Annex I and shall include:
| (a) | a copy of the request for cooperation and exchange of information and any reply received; |
|---|
| (b) | the reasons for referring to ESMA or to EBA the rejection or absence of action. |
|---|
Article 10
The receiving body shall not disclose the existence and content of a request for cooperation or exchange of information pursuant to Article 96 of Regulation (EU) 2023/1114unless the submitting body has given its express consent to such disclosure. Where such consent is not given and where it is not reasonably practicable to comply with the request without disclosing its existence or content, the submitting body shall withdraw or suspend its request until it is able to provide such consent to disclosure.
The submitting body that received information within the scope of this Regulation shall use it solely for the performance of its duties and the exercise of its functions or for the purposes of securing compliance with or enforcement of Regulation (EU) 2023/1114, including initiating, conducting, or assisting in, criminal, administrative, civil or disciplinary proceedings resulting from a breach of that Regulation.
Article 11
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
Provenance and validity dates, identifier, hash
| as of | 2024-09-24 → this publisher state was selected |
| publisher state | publisher version 2024-09-24 → latest held publisher-asserted |
| type | REG_IMPL Commission Implementing Regulation (EU) 2024/2494 of 24 September 2024 laying down implementing technical standards for the application of Regulation (EU) 2023/1114 of the European Parliament and of the Council with regard to standard forms, templates and procedures for the cooperation and exchange of information between competent authorities and EBA and ESMA |
| language | en |
| published | 2024-09-24 |
| lex_id | eu-eurlex:32024r2494:2024-09-24--aa656fb2437040f1668acd3c56c738b3caa6e34328514d8cc843b7b69d5828fd |
| record sha256 | 26843468d8c1139226275854102511c5d9963cc1db8af2873ea11b4a858a0964 |
New here? What am I looking at?
This is an official consolidated text: the original act with later amendments merged by EUR-Lex for the date shown above.
The consolidation date is not an entry-into-force or application date. It identifies a publisher wording state. The authentic legal acts remain those published in the Official Journal; Lex preserves the consolidated wording, source and hashes as a reading and comparison aid.
Each displayed provision carries its own hash so you can verify that Lex served the indexed text unchanged, here is how.
| tier | A, publisher-supplied consolidated wording-state dates |
| history begins | publisher |
| index built | 2026-08-15T09:01:06Z · corpus e9c4df0981c855855a1a28218cf086ddeb5bb691 |
| stamp signature | valid (ECDSA-P256) |